Intek M 795 Power
![]() Click to enlarge |
|
Intek M 795 Power
EXPORT MODEL A new series of state-of-the-art CB (27 MHz) mobile transceivers, with advanced software and hardware design, specifically conceived for Citizen Band operators and for car & truck drivers.
10 band programmable multi standard circuit design, matching frequency & operating mode requirements of various countries.
The new POWER SERIES family of CB radios is based on a new high power MOSFET transmitter circuit, rated at 20W RF maximum (International version) or at 4W RF maximum (European version).
This new and exclusive circuit design makes this radio one of the most advanced and sofisticated mobile CB transceiver in the market.
One radio only, ready for use in all the European countries !
This radio includes the new 2nd generation ESP "COMPANDER".
The meaning of "COMPANDER" is Compressor-Expander. This CPU controlled audio Speech Processor works as a modulation Compressor in TX and as a modulation Expander in RX. ESP provides a stronger and more clear and readable audio signal.
It is a great help in noisy areas and in case of long distance communication and weak signals.
The efficiency of ESP is even higher when communicating with another radio having the same ESP system.
Main features :
MULTI STANDARD CIRCUIT
10 BANDS PROGRAMMABLE
BACKLIGHTED LCD DISPLAY
2nd GENERATION ESP "COMPANDER" RX/TX MODULATION PROCESSOR (COMPRESSOR-EXPANDER)
AUTO SCAN
DUAL WATCH
HIGH QUALITY
DYNAMIC MICROPHONE WITH UP/DOWN AND LOCK KEYS
QUICK UP KEY
QUICK DOWN KEY
FIXED OR MANUAL SQUELCH
EMG
DIGITAL 10 BAR S/RF METER
HIGH POWER MOSFET TRANSMITTER
SPECIFICATIONS
GENERAL
Channels: Refer to programmed band
Modes: (AM, FM) Refer to programmed band
Operating Temp.: -10°/+55°C
DC Input Voltage: 13.2Vdc ±15%
Size: 140 x 37 x 190 mm
Weight: 800 gr
RECEIVER
System: CPU Controlled Double Conversion Super Heterodyne
IF: 1° 10.695 MHz / 2° 455 KHz
Sensitivity: 0.5μV for 20dB SINAD (FM)
0.5μV for 20dB SINAD (AM)
Audio Output Power: @10% THD 2.5W at 8 Ohm
Audio Distorsion: <8% at 1 KHz
Image Rejection: 65dB
Adjacent Ch. Rejec.: 65dB
Signal/Noise Ratio: 45dB
Current Drain: 400mA (stand-by)
TRANSMITTER
System: CPU Controlled PLL Synthesizer
Max Output Power: 4W at 13.2Vdc
Modulation: AM (from 85% to 90%) FM (1.8 KHz ±0.2 KHz)
Output Impedanced: 50 Ohm unbalanced
Current Drain: 1100 mA (at no modulation)
M-795 Power
FREQUENCY BAND / MODE PROGRAM
Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below:






