JCD 201 M Echo

JCD 201 M Echo 6p

Mike met compressor en up down, met 6 pin kabel.

Echo selection ‘high/low’ or ‘manual’

Two selectable output connectors 8 pin

Compressor level ‘high/low’ or ‘manual’

FM/SSB ‘power on’ / ‘power off’ switch

LOCK function

UP/DOWN function (not working on all transceivers)

‘ON AIR’ led indicator

Clear VU level meter (battery check)

Electret Condenser microphone type

TX warning (alarm) after 2-3 minutes continues TX. Microphone will switch automatically back to RX

Connector for optional PTT foot pedal (not included)

Connector wiring of the free ‘standard CB 6-pin’ adapter cable for the Alan 48 PRO:

1. MIC (MOD)

2. RX

3. TX

4. UP/DOWN (not working on all transceivers)

5. GND

6. Not connected

Always check carefully if your transceiver is compatible with your version of the JCD-201M microphone. We are not responsible for any damage caused due wrong usage (or wiring) of the microphone to your microphone or transceiver.

Up en down werkt niet op Presisent.