CBShop Gooseneck handsfree mike

CBShop Gooseneck hands-free mike

Special version for people who want to operate the hands-free microphone via their own transmitter button.

By using 12-volt power on the supplied red wire you can now transmit.

The transmit button on the Handsfree mike must remain on transmit.

However, you can continue to receive it.

Only when you give 12-volts to the gooseneck microphone via the red wire, will it transmit.

Specially made for crane operators who want to use their own lever or foot pedal for transmission.

This Handsfree mike is suitable for 6 pole CB radios of the brands Midland and President.

Cut pin 4 on Johnson 2 and Walker. Up and Down no longer works.