K-PO DX-5000 VFO EXPORT all mode transceiver

K-PO DX-5000 VFO EXPORT all mode transceiver

The K-PO DX-5000 VFO is the latest version of the popular DX-5000 series, based on the PLUS (V8.0) platform.

It is the only version in this series to feature an additional true VFO mode. When VFO mode is selected in the radio menu, you can directly enter your desired frequency into the radio.

With optional software, it can be programmed from 25,615 - 30,105 MHz.

Furthermore, many settings can be changed or added to the programming set. (See programming sets)

CBShop sells the latest version!

The new 5000 version 6 CB radio can be opened manually to all tires.

Turn on with the F and s / rf buttons pressed.

Then choose 2 bands in the display via the channels button.

Then long-press the F button.

The K-PO DX 5500 then resets.

Turn it off and on again, and it is open from 25,615-28,305.

28-30 MHz frequency range (expandable by software 25.615-30.105 MHz for export purposes)

AM / FM / LSB / USB / CW / PA modes

Transmit power AM 12 watts / FM 40 watts / CW: 12 watts

SSB: 40 Watt

Frequency steps 10 Hz / 100 Hz / 1 kHz / 10 kHz 

Features:

• RF control
• Noise blanker and ANL function
• Programmable controller Clarifier
• S-Meter
• Roger Beep
• Output power is adjustable (for AM / FM)
• Scan function
• Echo function can be activated
• Dual Watch (Dual Watch)
• Built-in SWR meter
• Display of the operating voltage of the display
• SWR protection circuit in poor
• Protection against excessive input voltage
• 10 kHz Switch
• Reset function
• Time-Out Timer
• Hi-cut function
• Emergency Call
• Switchable keypad lock
• Programmable via a PC (software & cable not included, optional on this page)
• 3.5 mm jack for external speaker
• CW sidetone 300Hz - 3 adjustable kHz in 10 Hz steps
• Socket for PA (Paging Speaker)
• PL-antenna connection socket
• Power supply 13.8V DC

Dimensions in mm 280 x 250 x 60

Weight 2 kg

IN PACKAGE

K-PO DX-5000 
Microphone
Mobile mounting bracket with screws
DC Cable
Manual EN