Astatic D104M Power mike

Astatic D104M Power mike

The D104-M6 series microphones are quality performance field effect amplified power microphones for amateur, citizen band, mobile, aircraft, marine applications.

An output impedance compatible with the inputs of almost all commercial transceivers and externally adjustable high gain amplifier ensures desired modulation level. The D104-M6 has an easily accessible control for volume so that the correct modulation level can be set for each operators voice. The D104-M6 preamplifier is powered by a readily available, easily replaced, 9 volt battery. The D104-M6 has a six wire coil cord which allows for relay, electronic or virtually any type hookup with almost any transceiver. The audio line is open during receive.

Specifications:

Type: Transistorized Amplified Ceramic

Output Level: -44 dB below 1 volt per microbar at 1 kHz into 1 megohm load

Output Adjustment: Approximately 40 dB range

Impedance: 5000 ohms max., recommended load of 100 ohms and up; performs well over entire impedance range up to open circuit

Connector: Configured with 4 pin connector.

Cable: Five conductor (one conductor shielded) coiled cord that extends to 2.3 m (7 1/2 ft.). Durable strain relief bushing protects against cable breakage at microphone housing.

Housing: Durable high impact molded black ABS

Battery: Standard 9 Volt Battery (Not Included)

Weight: 220 grams (7 3/4 oz.)